In this video, we show you how to check if you Piston is damaged on a Stihl TS410. Click here for a full list of parts, tools & transcript!
Parts
Non Genuine Cylinder & Piston Assy for Stihl TS410, TS420 Disc Cutters
https://bit.ly/2P9Sk18
Genuine Cylinder & Piston Assy for Stihl TS410 TS420 Disc Cutter – 4238 020 1207
https://bit.ly/2MxLnVA
N/G Recoil Assy for Stihl TS410 TS420 Disc Cutter – Replaces 4238 190 0302
https://bit.ly/30qLTIb
N/G Exhaust Silencer for Stihl TS410 Disc Cutters – Replaces: 4238 140 0610
https://bit.ly/2ZegufC
Non Gen Clutch for Stihl TS400, TS410, TS420 – 4238 160 2002
https://bit.ly/2KcoF0B
Tools
Genuine Torx Wrench/Plug Spanner for Stihl TS410 TS420
https://bit.ly/2qXvg7j
Piston Stop Tool for Stihl TS350, TS360, TS410, TS420 Chainsaws
https://bit.ly/32H8gud
FAITHFULL 42 Piece 1/4″ Socket & Screwdriver Bit Set in Storage Case
https://bit.ly/2P92fE6
Web: https://www.lsengineers.co.uk/
Facebook: https://www.facebook.com/lsengineers
Twitter: https://twitter.com/LS_Engineers
Blog: https://www.lsengineers.co.uk/blog.html
Health & Safety Warning Please ensure that you have safely prepared the machine and workspace. If you are unsure about any aspect of the task please seek professional advice.
Transcript
Today we’re going to show you how you can check your piston on a Stihl TS410 Disc Cutter. First, start to detach the water kit from the machine by unscrewing the holder using a torx spanner. For safe keeping you can screw then screw back in place. Now, using the torx spanner, remove the screw that attaches the belt guard to the machine. Using a 13mm spanner release the tension in the belt by turning it anti-clockwise. Once that’s been loosened, remove the recoil by unscrewing the three 13mm bolts which hold the it to the machine. Now that’s removed, free the belt completely from the machine and detach the arm. Using a torx spanner unscrew the spark plug cap. Then, loosen the three screws on the shroud. Remove the four screws of the air filter cover to free the air and gauze filter. Now, return to the shroud, and completely remove each screw. Rest the shroud back on top of the machine until it’s been detached completely. Then remove the four screws which hold the flywheel cover on by using the torx spanner. Once that’s removed, lift the shroud and detach the wires from the machine. Remove the spark plug cap, and unscrew the spark plug from the machine. Using the torx spanner, remove the two screws that hold the cylinder cover in place. Now, screw in the piston stop to lock the crank. Use a 13mm spanner and turn anti-clock wise to free the starter cup. Then detach the 13mm bit and return to completely remove the starter cup. Now, use a 19mm spanner to loosen the clutch by pulling it clockwise. Spin it clockwise by hand to completely remove the clutch. Then, remove the washer and clutch pulley. Now that’s removed, turn to the exhaust and remove the four screws which hold it in place using a torx spanner. You will now be able to remove this from the machine, along with the guard which sits behind it. From this position you will be able to see the Cylinder, and the piston inside it. By turning the crank you will be able to see the piston move. If the piston looks dry and scored, then you should replace your piston. That’s how you check your piston on a Stihl TS410.
If you have any issues, questions or would like to talk to our customer service team please visit our website. Please note L&S is a UK based trading company, please see our website for information on delivery to other countries.
0 comentarios