Descripción en el Video de Stihl
This video might be helpful if you own a 4mix and want to use the decarb. It did work well on both my blower and trimmer. Its not hard to do. I adjusted the valves after doing this. The trimmer had more carbon than my blower. Washing it out with brake cleaner also helped dislodge some of the carbon as well. The decarb was $4.75 at my Stihl parts counter. The trimmer took a few ounces each time I did it, back to back.
Etiquetas del Video
Cuernavaca,stihl fs130,trimmer,engine,decarb,valve,service,maintenanceLinks Relacionados con MéxicoSopladoras Stihl México
Contenidos @StihlMaster.mx mostrar
first, nice video
Did u remove the carb and muffler at all?
Didn't know that since I assumed it feeds into the top end on a stratified charge sealed crankcase model and out the valves instead of in the crankcase and thru the ports in the side walls of the jug and ignights on top before the valves cycle out the old air and let in fresh oxygen rich air. Been a while since I did this.
I fill mine with lacquer thinner and let it sit for 2 or 3 days. Carbon is normally all dissolved.
I bought an FS-130 15 years ago, and it still runs like a beast. When I bought it Stihl didn't offer a synthetic oil hence the need for decarbonization. I run TrueFuel now with excellent performance.