Descripción en el Video de Stihl
Get the USB Borescope Used in the video here http://amzn.to/2ko58Ng
today we are tearing down the Stihl Br600 to see what is wrong and to see if it’s worth fixing or not. I picked this up cheap so it will be a interesting project to say the least. what sucks about these engines is that it has a 4 mix set up, meaning a 2 stroke engine with valves. in the stihl br600 the valves need to be set every 100 hours if not then the valves lock up and the machine is toast. This machine seems to be in very good shape except the wrist pin let go and destroyed the motor.
Sound effects by Epidemic Sound
http://epidemicsound.com
Royalty-free music by Epidemic Sound
http://epidemicsound.com
Cameras used in My videos
Olympus TG-Tracker http://amzn.to/2dYKLZr
Sony A6000 http://amzn.to/1ROrgJl
TG-860 http://amzn.to/1VU6vzP
DJI Osmo http://amzn.to/1QDjGFb
Drift Hd Ghost http://amzn.to/1UUiZZU
SJ4000 http://amzn.to/2bel0jt
Vidi Action Camera http://amzn.to/1SaLBtu
Etiquetas del Video
Cuernavaca,stihl,br600,valve timing,push rods,bent crankshaft,br600 issues,br600 no start,4 mix engine,2 stroke,2 stroke valves,broken push rods,broken wrist pin,valves locked up,diy,repair,tear down,engine destructionLinks Relacionados con MéxicoSopladoras Stihl México
Seen a BR600 drop a valve and it got stuck in the top of the piston.
@ 2:19…this is not a "2 stroke" engine.. IT IS A "4 STROKE", called a "4 MIX" it does use a 50 to 1 gas to 2 stroke oil mix, but is not i repeat NOT a 2 stroke.. cheers! nice vid otherwise 🙂
its 4 stroke with valves. runs on mix
If you run the BR series blowers without the tip it causes less back pressure doesn't cool the engine properly therefore it overheats and the wrist pin seizes up still voided my warranty because I brought it in without the tip